IOS 15 great SW but without Data or UC license on it - no IP SLA. Without that you have no easy way of configuring floating static routes with tracking and doing IP reachability tests of your default GW.

This solution is doing pretty much the same but without IP SLA at all - we are going to utilize only the EEM with track feature like before. So basically, EEM script would be something like this:

event manager applet chilly

event timer watchdog time 10

action 1.0 cli command "enable"

action 1.1 cli command "ping [DF-GTW-HERE] repeat 3 timeout 2"

action 1.3 regexp "!" "$_cli_result" result

action 1.4 if $result eq "!"

action 1.5  track set 100 state up

action 1.6 else

action 1.7  track set 100 state down

action 1.8 end

Before putting this EEM script live configure adequate track object, like this:

track 100 stub-object 

default-state down

Off course if you need you can fine tune this EEM script...for example set timer to 5 sec or similar.

Now you can configure your floating static routes like before...with higher and lower AD on them...

1 response found
Glidgecicsk on Saturday, 21 May 2022 06:52 said:
https://newfasttadalafil.com/ - Cialis Cialis Kopfschmerzen Behandlung Cialis donde comprar cialis online Gxbhtg https://newfasttadalafil.com/ - cialis 5mg best price Gruhhn Some proteins are the structural building blocks of cells and tissuessuch as collagen in skin and keratin in fingernails whereas others are involved in control and coordination insulin for example manages blood glucose and antibodies counteract microbes.
0 0
Leave a reply